Zigbee3.0 5 in 1 LED Controller

Our Zigbee3.0 5 in 1 LED controller is suitable for all kind of low voltage LED strip light,such as Mono color/dual color/RGB/RGBW/RGBCCT LED strip lights. It is so far the most advanced controller, which integrates RGB management, CCT adjusting, and dimming function.

Zigbee3.0 5 in 1 LED controller Features:

1.Our Zigbee 5 in 1 LED controller is the best Zigbee controller to manage the color changing of your RGB strip light. It has below major features:

2.Connect to LED strip

 Notice:controller input voltage must be accordance with the required voltage of the LED strip light.

  Input voltage=output voltage

3.Smart Link/Unlink

We have 3 method to link/unlink to APP.

（1）Long press “set”button 3 seconds,the purple indicator light will blink 3 times, the controller goes into smart link/unlink mode.

（2）Use LM091 remote,long press the linked zone ON button for 3 seconds,the purple indicator light will blink 3 times, the controller goes into smart link/unlink mode.

（3）Switch ON and OFF the light 3 times within 10 seconds,the purple indicator light will blink 3 times, the controller goes into smart link/unlink mode.

Note:Pilot lamp red light always ON means controller not link with APP,need to do above steps to link again. Green light always ON means controller link with APP and the light is controllable.

Switch output mode:Short press “SET” button to switch the output mode.The indicator lamp is flickering means the switching successfully. Different colors flickering correspond to different output mode.Details show below sheet:

White light     flickering	Yellow light     flickering	Red light     flickering	Green light   flickering	Blue light     flickering
Single color   mode	Dual color   mode	RGB mode	RGBW mode	RGB+CCT  mode(Default  mode)

Suggestion:Complete the network distribution of the controller first, then adjust the output mode according to the Pilot Lamp.

Pilot Lamp Instruction

Red light always-on	Green light always-on	Red light blinking	Blue light alway-on
Disconnected from network	Networking successfully	Waiting for smart link	Wifi router disconnected but still controllable

4.Auto-synchronizaiton function

 Different controllers can work synchronously when they are

started at different times,controlled by same remote,under same dynamic mode and with same speed.

5.Auto-transmitting Diagram

One controller can transmit the signal from the remote control to another controller within 30m.As long as there is a controller within 30m,the remote control distance can be limitless.

6.How to connect the Zigbee Gateway to Smartphone   

(1)Power on the Zigbee gateway,long press the “SET”button until the red pilot lamp is blinking.

 

(2)When the red pilot lamp blink,open the Smart Life APP,and press “Add Device”.

It will discover the new device automatically,then press “add” to complete the linking.

7.Free screw when connect with LED strip

As is seen from above,the Zigbee 5 in 1 LED controller is the most powerful controller, which combines multiple functions and easily integrated into smart home control system. It will be used for more and more lighting applications.